KOMO Certification and Testing for Plastics Piping Systems Inside Buildings for Heating Systems
Receive a quote tailored to your needs
Who is KOMO certification and testing for?
The KOMO product certificates for plastic piping systems inside buildings for heating system are relevant for installers/ plumbers, architects, contractors, municipalities and housing associations engaged with installing certified piping systems on floors and walls.
About Komo product certification and testing
Certification of plastics piping systems inside buildings for heating systems with the KOMO mark is applicable to piping systems, i.e. pipes and fittings assembled together. This means that for these systems it is not possible to certify a pipe or fitting on its own. The guaranteed lifetime of the KOMO certified plastic piping systems inside buildings for heating systems is at least 50 years. Testing will demonstrate compliance to national and international product standards.
KOMO certification evaluation guidelines
Plastics piping systems of PE-RT intended for underfloor heating (BRL-5602)
KOMO certification under Kiwa evaluation guideline BRL5602 concern products intended to be applied in piping systems for underfloor heating systems at a design (working) overpressure of 4 or 6 bar.
The evaluation guideline BRL 5602 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping systems of PE-RT intended for floor heating.
Plastics piping systems of PE-X intended for underfloor heating (BRL-5603)
KOMO certified products according to BRL 5603 are intended to be applied in piping systems for underfloor heating systems at a design (working) overpressure of 4, 6 or 10 bar.
The evaluation guideline BRL 5603 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping systems of PE-X intended for floor heating.
Plastics piping systems of PB intended for underfloor heating (BRL-5604)
KOMO certified products according to BRL 5604 are intended to be applied in plastics piping systems of PB intended for underfloor heating at a design (working) overpressure of 4 or 6 bar.
The evaluation guideline BRL 5604 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping systems of PB intended for floor heating.
Plastics piping systems of PB intended for heating installations: radiator connections (BRL-5605)
KOMO certified products according to BRL 5605 are intended to be applied in piping systems for underfloor heating systems at a design (working) overpressure of 6 bar.
The evaluation guideline BRL 5605 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping systems of PB intended for heating installations: radiator connections.
Plastics piping systems of PE-X intended for heating installations: radiator connections (BRL-5606)
KOMO certified products according to BRL 5606 are intended to be applied in piping systems for heating distribution systems at a design (working) overpressure of 6 or 10 bar.
The evaluation guideline BRL 5606 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping systems of PE-X intended for heating installations: radiator connections.
Plastics Piping systems of PE-RT intended for heating installations: radiator connections (BRL-5607)
KOMO certified products according to BRL 5607 are intended to be applied in piping systems for heating distribution systems at a design (working) overpressure of 6 or 10 bar.
The evaluation guideline BRL 5607 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastic piping systems of PE-RT intended for heating installations: radiator connections.
Plastics piping systems of PE-X/AL intended for heating installations: radiator connections (BRL-5610)
KOMO certified products according to BRL 5610 are intended to be applied in piping systems for heating distribution systems at a design (working) overpressure of 10 bar.
The evaluation guideline BRL 5610 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping system of PE-X /Al intended for heating installations: radiator connections.
Plastics piping systems of PE-RT/AL intended for heating installations: radiator connections (BRL 5611)
The products according to BRL 5611 are applicable for piping systems in heating distribution systems at a design (working) overpressure of 10 bar.
The evaluation guideline BRL 5611 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping system of PE-RT /Al intended for heating installations: radiator connections.
Plastics piping systems of PP intended for underfloor heating (BRL-5612)
The products are intended to be applied in piping systems for hot water distribution for floor heating systems at a design (working) over-pressure of 4 or 6 bar.
The evaluation guideline BRL 5612 is a certification scheme for the KOMO (technical approval-with-) product certificate of plastics piping systems of PP intended for floor heating.
Manifolds intended for use in underfloor heating systems for warm water distribution (BRL-K17701)
Kiwa Watermark certification under Kiwa evaluation guideline BRLK17701 applies to manifolds to be connected to a heat and/ or cold source.
The evaluation guideline BRL K17701 is a certification scheme for manifolds for warm water and chilled water.
Contact our certification experts in this area to study your question and work with you to find the right solution to obtain the KOMO quality mark or Kiwa Watermark in accordance with the Kiwa evaluation guideline.
Find certified companies and organizations
Search company name, city, standard, BRL and/or certificate number with this finder on the Kiwa Netherlands website.
KOMO Certification and Testing for Flexible Piping Systems for District Heating
Flexible piping systems for district heating can be certified with the KOMO quality mark. KOMO quality statements under Kiwa assessment guidelines BRL- 5609-1 and 5609-2.
DIN CERTCO Approval, Testing and Inspection
Kiwa is a recognized laboratory by DIN CERTCO to provide testing and inspections services plastics piping systems for heating systems materials.
KOMO Certification and Testing
Tests and KOMO certification guarantee compliance with the requirements of Dutch standards for products for the building and infrastructure sector.
Kiwa Watermark Certification and Testing for Plastics Piping Systems Inside Buildings
Plastics piping systems for cold drinking water transport inside buildings can be certified with Kiwa Watermark to ensure quality. Kiwa quality statements under Kiwa evaluation guidelines BRL- K536-A, BRL- K536-B, BRL- K536-C, BRL- K536-D, BRL- K536-E, BRL- K536-F, BRL- K536-G, BRL- K536-H and BRL- K536-K.
Performance Testing for Plastics, Multilayer- and GRP (Glass reinforced Plastics) Piping Systems
Physical, mechanical, chemical, leak tightness and hydrostatic pressure testing on all types of plastic piping systems to have certification requirements validated and demonstrate compliance to national and international product standards.
KOMO Certification and Testing of Geothermal Heat Exchange Systems in Closed Circuits
Geothermal heat exchange systems in closed circuits for cooling and heating purposes can be certified by Kiwa for the KOMO quality mark under BRL- 5219.
Additional information
About KOMO mark by Kiwa
Want to know more about how to obtain and continue the KOMO quality mark for your products? Continue reading