Uncover corrosion or erosion within your infrastructure and seeking accurate quantification? Are you wondering about the operational viability of your installation in the face of these challenges? Explore the need to closely monitor the progression of damage over time and ensure effective control measures are in place.

What you need to know

In this surface inspection technique, use is made of a handheld 3D Laser scanner. The scanner is moved above the area to be inspected and it is then constantly acquiring the points of the surface. The scanner doesn’t require any external reference system; it is possible to examine complex geometries as well as flat surfaces. After inspection, the data are processed and colorized according to wall thickness reduction. The high degree of reproducibility makes corrosion mapping an interesting tool to use when monitoring corrosion, to their visible and it allows, for example, the corrosion speed of the material to be calculated efficiently but also more complex calculations such as RLA (remaining life assessment) and any other integrity assessment method.

Higher scan speed at fixed accuracy thanks to 3D Laser

Fast standard resolution scanning is applied to the whole surface while high definition resolution is only applied to affected zones. In this way scanning rates as high as several m²/hour can be achieved after proper calibration and preparation without compromising the accuracy that remains constant during the whole scan.

Available scanners
  • Handheld 3D scanner

Advantages

  • Accuracy and repeatability: each indication is measured, mapped and recorded with the highest degree of accuracy using standard integrity evaluation techniques without comprises.
  • Contact-free technique: the inspection may be carried out in operating conditions in most cases